3/24/2023 0 Comments Reamp in reaper![]() ![]() (And you probably already have one lying around so.) Get too fast and loose with the connections and now the simulator plugins are winning again. But you will very likely have better results using a passive DI box backwards. Now drag the first of your selected tracks to the one that is going to be your bus. First, secure the following: 1.) Audio Interface with preamp 2.) Reaper (fully installed with plug-ins) 3.) Electric guitar with cable 4.) Direct Box Step1. Alternatively, if you want to hear the effected sound on the right channel and the DI signal on the left, set the mode to Git/Stack. You could likely get away with connecting a combo balanced/unbalanced 1/4" output directly to an amp input. How to make a group/folder the fast way: Sequencer view: Create a new track (this is gonna be your bus track - or folder track) select the tracks you want to group. 1) Set channel for DI signal: You can do this by choosing your preferred reamp channel (SPDIF, main output) in the output section. ![]() You don't need to have both of your stereo monitors connected during the reamp pass. You can "borrow" one of the outputs you normally use for monitoring for the reamp work. Return in reainsert is the the channel that will receive your amp signal. Send in reInsert is the channel feeding your amp. So my question is which Audio interface would allow me to do it this way and what cables will i need for this process ? 20th June 2017 2 farbrorplast Here for the gear 5 years The reaper plugin resinsert will do the trick. 4) Tried setting up the outputs in Reaper so I could record the reamp tone I've been able to playback the DI and successfully process the tone (tested by changing the tone on the Axe FX to ensure that the DI is in fact being processed), but for the life of me can not figure out how to record the processed sound. Name Trk2 with the patch selected, record enable and mute Trk2. Make a new stereo track (Trk2) in reaper and set its input to Input 3 + 4, on mine it is called Eleven Rig L + Eleven Rig R. That is exactly what i need! There is no Di boxes were involved so simple! Now i am using Focusrite Solo audio interface and it does not have the output lines. I am working on a mac (os 10.9.5) and have reaper 4.74 and the way I get it to track/reamp is as follows: 0. (And you probably already have one lying around so.) Get too fast and loose with the connections and now the simulator plugins are winning again.Hello guys! I saw a guy on Youtube showing how he takes his tracks out of DAW via the output on his Audio interface ( I could not see with audio interface he was using ) then send it to a guitar pedal Color Box processes it and then plug the output of the pedal back to the front input of his Audio interface. You could likely get away with connecting a combo balanced/unbalanced 1/4" output directly to an amp input. ![]() So my question is which Audio interface would allow me to do it this way and what cables will i need for this process ? That is exactly what i need! There is no Di boxes were involved so simple! Now i am using Focusrite Solo audio interface and it does not have the output lines. Hello guys! I saw a guy on Youtube showing how he takes his tracks out of DAW via the output on his Audio interface ( I could not see with audio interface he was using ) then send it to a guitar pedal Color Box processes it and then plug the output of the pedal back to the front input of his Audio interface. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |